Skip to main content
EZ Gateway M-Bus to Modbus and BACnet

EZ Gateway M-Bus to Modbus and BACnet

The Quick and Easy M-Bus to Modbus and BACnet Solution

The EZ Gateway M-Bus to Modbus and BACnet is an easy to use, high-performance building and industrial automation protocol gateway for integrators to interface M-Bus products to Modbus and BACnet management systems in commercial buildings, campuses and industrial facilities over Modbus RTU, Modbus TCP/IP, BACnet MS/TP or BACnet/IP protocols. M-Bus products encompass a wide range of applications such as energy, gas, heating, water, VFD drives and PLCs. M-BUS to Modbus and BACnet protocol translations include:

  • M-Bus to Modbus
  • M-Bus to Modbus TCP/IP
  • M-Bus to BACnet/IP
  • M-Bus to BACnet MS/TP
This product is protected by FieldSafe.

Muestra menos
阅读更多
EZ Gateway M-Bus to Modbus and BACnet
EZ Gateway M-Bus to Modbus and BACnet
The Quick and Easy M-Bus to Modbus and BACnet Solution
特点和优势
视频
选项
认证
样本资料
特点和优势

With the EZ Gateway M-Bus to Modbus & BACnet, the integrator or contractor does not need to be a protocol expert, and can minimize configuration and commissioning time, while also reducing ongoing operating and maintenance costs.

The EZ Gateway M-Bus to Modbus & BACnet combines field-hardened M-Bus, Modbus and BACnet protocol drivers with an easy to use configuration interface that, once configured, allows M-Bus devices to be presented as virtual BACnet devices which simplifies commissioning, configuration and troubleshooting. The intuitive web-based interface allows configurations to be built in the field or in the office. Additionally, the configuration profiles can be downloaded and then uploaded to other FieldServer M-Bus applications, simplifying the commissioning and integration process on repeatable applications.

1. M-BUS INTEROPERABILITY

  • M-Bus Explorer discovers all M-Bus devices in the network, shows the manufacturer details as well as available points, and offers one-click profile generation
  • Profile Loader enables efficient profile editing, exporting and importing
  • Up to 64 slave devices (max device count based on model)
  • Communication between devices with different baud rates at the same time
  • Virtual nodes allow each M-Bus device connected to a single EZ Gateway to be seen as a separate device on the BACnet network
2. BACNET COV
  • Use the Change of Value (CoV) setting to reduce the amount of BACnet data overhead to allow network traffic to be less congested by transmitting data only when detecting an M-Bus device status change
3. REMOTE ACCESS AND SUPPORT
  • All FieldServer gateways come with Remote Access support.  Once registerd to the MSA Grid, use the Remote Access capability to attach to the FieldServer gateway to monitor, maintain and troubleshoot installed equipment
4. BACNET BBMD SERVER SUPPORT
  • For connecting to remote BACnet networks
5. REMOTE DIAGNOSTICS
  • Diagnostics of the devices connected to the network is available via Web Interface
6. MSA GRID SUPPORT
  • Register your EZ Gateway to the MSA Grid interface for remote access to local applications, configuration, and device management
视频
显示更多视频
显示更少视频
选项

Model Numbers   

  • FS-EZ1-MBUS-MOD-BAC: 16 slave devices
  • FS-EZ2-MBUS-MOD-BAC: 32 slave devices
  • FS-EZ3-MBUS-MOD-BAC: 64 slave devices

Power Requirements

  • 9-30V DC or 12-24V AC
  • Current draw @ 12V:
    • 1 Slave: 580 mA
    • 64 Slaves: 980 mA

Enclosure   

  • Dimensions: 4.5 x 2.9 x 1.6 in. (11.5 x 7.4 x 4.1 cm)
  • Weight: 0.4 lbs (0.2 Kg)

Environmental   

  • Operating Temperature: -40 to 75C (-40 to 167F))
  • Relative Humidity: 5-90% non-condensing

Other   

  • Configuration/Diagnostic utilities
  • Table, wall, or DIN rail mount

Communication   

  • Baud: 2400, 4800, 9600, 19200, 38400
  • Start Bit: 7, 8
  • Ethernet: 10/100 BaseT MDIX

 

认证
批准可能会因配置、部分编号和/或国家/地区而有所不同, 并且可能会未经通知而更改。联系客户服务部或检查产品上的批准标签,以了解具体的批准信息
样本资料
Part Number(s)

请求更多信息


Thank you! An MSA representative will be in touch soon.